Gigabit Cudy WiFi6 5Ghz Dual Band Wireless Mesh Router / Wireless Access Point | AX3000

Gigabit Cudy WiFi6 5Ghz Dual Band Wireless Mesh Router / Wireless Access Point | AX3000 The Cudy WR3000 AX3000 Gigabit Dual Band Wi-Fi 6 Mesh Router features a new Wi-Fi 6 chip with a 4-nm made process, enabling the AX3000 to maintain responsiveness and handle intensive transmission tasks such as online gaming streams and 4K live feeds. Equipped with Wi-Fi 6, the AX3000 boasts the highest 160Mhz bandwidth and 1024-QAM to reach up to 3Gbps speeds, which is more than 2.5x faster than the last-gen AC 2 2 Wi-Fi router. This high throughput allows massive amounts of data including your 4K video streaming and hopping to end devices without any throttling. The upgraded Wi-Fi 6 standard features downlink and uplink MU-MIMO and OFDMA, providing up to 8X (2.4 GHz) to 16X (5 GHz) greater network capacity to be more responsive under heavy use. Features: Super-Fast AX3000 Wi-Fi 6 1.3 GHz Dual-Core Cortex-A53 CPU 4 10/100/1000Mbps Ethernet Ports 160 MHz Channel Width DL/UL OFDMA and DL/UL MU-MIMO Wireguard/OpenVPN/L2TP/PPTP VPN Server and Client IPv4/IPv6 TR069/TR098/TR181/TR111 Specifications: Processor: 1.3 GHz Dual-Core ARM Cortex-A53 CPU Antennas: 4 Fixed Omnidirectional Antennas Ethernet Ports: 1 10/100/1000Mbps WAN Port 3 10/100/1000Mbps LAN Ports Buttons: WPS Button, Reset Button External Power Supply: 12 V / 1 A Product Dimensions without Antennas: 18 x 10.7 x 3.5 cm Product Dimensions with Antennas: 20 x 11.7 x 3.5 cm Wireless Standards: IEEE 802.11ax/ac/n/a 5GHz, IEEE 802.11ax/n/b/g 2.4GHz Wireless Frequency: 5GHz, 2.4GHz Wireless Bandwidth: 20/40/80/160 MHz Signal Rate: 2402Mbps (5 GHz), 574Mbps (2.4 GHz) Compatible with 802.11a/b/g/n/ac Wi-Fi standards Model WR3000 Hardware Features Processor 1.3 GHz Dual-Core ARM Cortex-A53 CPU Flash / DDR 16 MB NOR / 256 MB DDR3 Antennas 4 × Fixed Omnidirectional Antennas Ethernet Ports 1 × 10/100/1000 Mbps WAN Port 3 × 10/100/1000 Mbps LAN Ports Buttons WPS Button, Reset Button External Power Supply 12 V / 1 A Dimensions (W x D x H) 180*107*35 mm (Not Include Antennas) 200*117*35 mm (Include Antennas) Wireless Features Wireless Standards IEEE 802.11ax/ac/n/a  5 GHz IEEE 802.11ax/n/b/g  2.4 GHz Wireless Frequency 5 GHz, 2.4 GHz Wireless Bandwidth 20/40/80/160 MHz Signal Rate 2402 Mbps (5 GHz), 574 Mbps (2.4 GHz) Compatible with 802.11a/b/g/n/ac Wi-Fi standards Transmit Power CE: <20 dBm (2.4 GHz), <23 dBm (5 GHz) FCC: <30d Bm (2.4 GHz & 5 GHz) Wireless Modes Enable/Disable Wireless Radio, WMM Wireless security WPA-PSK, WPA2-PSK, WPA3-SAE WPA-PSK/WPA2-PSK, WPA2-PSK/WPA3-SAE Other Features UL/DL OFDMA, UL/DL MU-MIMO, Beamforming, Mesh Software Features VPN Server and Clientnet Wireguard/OpenVPN/L2TP/PPTP DNS over TLS Cloudflare/Google/Quad9 WAN Type Dynamic IP/Static IP/PPPoE DHCP Server, DHCP Client List, Address Reservation Dynamic DNS Compatible with 15 more DDNS providers Guest Network 2.4 GHz guest network × 1 5 GHz guest network × 1 NAT Port Forwarding, Port Triggering, UPnP, DMZ Others Package Content Wi-Fi Router Power Adapter RJ45 Ethernet Cable Quick Installation Guide Environmental Requirements Operating Temperature: 0 ℃ ~ 40 ℃ (32 ℉ ~104 ℉) Storage Temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) Operating Humidity: 10% ~ 90% non-condensing Storage Humidity: 5% ~ 90% non-condensing System Requirements Windows, macOS, Android, iOS, or other OS with networking capability Firefox, Chrome, Safari, Edge, or other up-to-date web browsers Cable/DSL/ONT modem or other internet source devices Internet subscription with ISP or carriers Boosting or Creating a Wi-Fi is up to You Wi-Fi Router When Internet access from DSL or cable modem is available for one user but more users need to share the Internet, please use the Router Mode. Wi-Fi Extender The Wi-Fi Extender (repeater) mode extends your Wi-Fi coverage to hard-to-cover area. *Requires firmware 1.15.5 Wireless AP Wireless AP mode is more used to transfer wired connection into wireless. Usually, it is behind a router and doesn’t has a DHCP server. WISP WISP extends Wi-Fi but creates a subnet for connected devices, so it’s safer than extender mode. *Requires firmware 1.15.5