5 Meter Duplex Multi-Mode Fiber Cable | UPC LC-LC Fiber Cable | Fiber Patch Cord Multi-Mode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron. Multi-Mode Cables should only be used with Multi-Mode SFP’s and equipment and will not work on single mode sfp’s. Please see our guide at Fiber Optic Cables & SFP Compatibility for more information. Specifications: Speed as per installed SFP or SFP e.g 1.25 Gbps or QSFP or QSFP 10 Gbit/s or 40 Gbit/s Diameter : 3mm 0.45mm steel strength member Duplex (Dual MultiMode and Dual LC Connectors) LC/UPC LC/UPC G.657A2, 2.0×3.0mmmm LSZH (Low Smoke, Zero Halogen) Tensile Strength Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable. G.657A2 Bend Ratio vs Other Specifications Fibre Type Bending Radii Attenuation Increase (db) G652D 100 turns on 25mm mandrel at 1310/1550nm ≤ 0.03 G652D 100 turns on 30mm mandrel at 1625nm ≤ 0.1 G657A2 10 turns on 15mm mandrel at 1550nm ≤ 0.05 G657A2 10 turns on 15mm mandrel at 1625nm ≤ 0.1 G657A2 1 turn on 10mm mandrel at 1550nm ≤ 0.1 G657A2 1 turn on 10mm mandrel at 1625nm ≤ 0.2 G657A2 1 turn on 7.5mm mandrel at 1550nm ≤ 0.5 G657A2 1 turn on 7.5mm mandrel at 1625nm ≤ 1.0 These Fiber Cables Are Commonly used with the Fiber SFP’s below LC Fiber Connectors Explained in Detail Single Mode Fiber Cable Usage and Instructional Video
