Coaxial Cable Video Amplifier for CCTV Cameras | RG59 / RG6u Signal Booster

Coaxial Cable Video Amplifier for CCTV Cameras | RG59 / RG6u Signal Booster Features: Video Amplifier with 1 Channel BNC Input/Output CVBS Coaxial Cable 1-channel female BNC video input and 1-channel female BNC video output Adjustable resolution (HFGAI) and gain (GAIN) Applicable to amplify and balance coaxial video signal from CCTV camera or other sources for long distance transmission. High anti-interference performance, adopting copper connector to reduce signal interference brought by poor contact Adjustable to compensate and boost coaxial cable distortion Long transmission distance and high image quality The circuit consists of independently isolated and compensated transistors that carry the output signal to 75 Ohm. Specifications: Voltage input: DC 12V /- Input/Output Impedance: 75Ohm Input Connector: 1x BNC Female Output Connector: 1x BNC Female Frequency response: adjustable, compensate and boost coaxial cable distortion Bandwidth (-3dB): 10Hz ~ 7.5MHz Gain: adjustable, up to 6dB Max. output voltage: 2.5Vp-p Case: Metal Dimension: 95(L)x85(W)x25(H)mm Instructions: Connect to DC 12V power supply.The LED indicator is on. Connect the output of the video source (CCTV camera) to the “Video In” BNC connector. Connect the video output cable to the “Video Output” BNC connector. After the above connections are made, first adjust GAIN to the video output voltage about 1Vp-p, second, adjust HFGAI (resolution). Repeat the above operations to obtain the best image quality.